Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 708
static leases 4 (config-dhcpd-static_leases:4) level commands
clrscrn
Clears the screen.
exit
Exits to the config-dhcpd level.
ip address <IP address>
Sets the reserved IP address.
mac address <hexadecimal>
Sets the MAC Address. Each byte is represented by
two adjacent hex digits. Bytes may run together or
be separated by optional punctuation: 123ABC "12
3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that
quotes must enclose the value if it contains spaces.
no ip address
Clears the reserved IP address.
no mac address
Removes the MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
static leases <number>
Change to dhcpd static lease level.
write
Stores the current configuration in permanent
memory.
static leases 5 (config-dhcpd-static_leases:5) level commands
clrscrn
Clears the screen.
exit
Exits to the config-dhcpd level.
ip address <IP address>
Sets the reserved IP address.
mac address <hexadecimal>
Sets the MAC Address. Each byte is represented by
two adjacent hex digits. Bytes may run together or
be separated by optional punctuation: 123ABC "12
3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that
quotes must enclose the value if it contains spaces.
no ip address
Clears the reserved IP address.
no mac address
Removes the MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
static leases <number>
Change to dhcpd static lease level.
write
Stores the current configuration in permanent
memory.
static leases 6 (config-dhcpd-static_leases:6) level commands
clrscrn
Clears the screen.
exit
Exits to the config-dhcpd level.
ip address <IP address>
Sets the reserved IP address.
mac address <hexadecimal>
Sets the MAC Address. Each byte is represented by
two adjacent hex digits. Bytes may run together or
be separated by optional punctuation: 123ABC "12
3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that
quotes must enclose the value if it contains spaces.
no ip address
Clears the reserved IP address.
no mac address
Removes the MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
static leases <number>
Change to dhcpd static lease level.