Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 709
write
Stores the current configuration in permanent
memory.
static leases 7 (config-dhcpd-static_leases:7) level commands
clrscrn
Clears the screen.
exit
Exits to the config-dhcpd level.
ip address <IP address>
Sets the reserved IP address.
mac address <hexadecimal>
Sets the MAC Address. Each byte is represented by
two adjacent hex digits. Bytes may run together or
be separated by optional punctuation: 123ABC "12
3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that
quotes must enclose the value if it contains spaces.
no ip address
Clears the reserved IP address.
no mac address
Removes the MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
static leases <number>
Change to dhcpd static lease level.
write
Stores the current configuration in permanent
memory.
static leases 8 (config-dhcpd-static_leases:8) level commands
clrscrn
Clears the screen.
exit
Exits to the config-dhcpd level.
ip address <IP address>
Sets the reserved IP address.
mac address <hexadecimal>
Sets the MAC Address. Each byte is represented by
two adjacent hex digits. Bytes may run together or
be separated by optional punctuation: 123ABC "12
3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that
quotes must enclose the value if it contains spaces.
no ip address
Clears the reserved IP address.
no mac address
Removes the MAC Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
static leases <number>
Change to dhcpd static lease level.
write
Stores the current configuration in permanent
memory.
static route 1 (config-staticroute:1) level commands
clrscrn
Clears the screen.
default metric
Restores the metric to default value.
exit
Exits to the config-gateway level.
friendly name <text>
Set the friendly name for static route. <text> =
friendly name
gateway <text>
Sets the gateway for static route network.
interface <text>
Sets the route interface <text> = interface name
metric <number>
Sets the metric for static route. <number> = metric
network <text>
Sets the IP address and network mask for static
route network.
no friendly name
Remove the friendly name