Lantronix EDS1100

5: Commands and Levels
EDS1100/2100 Command Reference 70
rm <file>
Remove a file
rmdir <directory>
Remove a directory
show
Show file system statistics
show history
Displays the last 20 commands entered during the current CLI
session.
show tree
Show all files and directories from current directory
tftp get ascii <source file>
<destination file> <host>
Get an ascii file using TFTP
tftp get ascii <source file>
<destination file> <host> <port>
Get an ascii file using TFTP
tftp get binary <source file>
<destination file> <host>
Get a binary file using TFTP
tftp get binary <source file>
<destination file> <host> <port>
Get a binary file using TFTP
tftp put ascii <source file>
<destination file> <host>
Put an ascii file using TFTP
tftp put ascii <source file>
<destination file> <host> <port>
Put an ascii file using TFTP
tftp put binary <source file>
<destination file> <host>
Put a binary file using TFTP
tftp put binary <source file>
<destination file> <host> <port>
Put a binary file using TFTP
touch <file>
Create a file
ftp (config-ftp) level commands
admin password <text>
Sets the administrative password for the FTP server.
<text> = administrative password.
admin username <text>
Sets the administrative username for the FTP server.
<text> = administrative username.
It also removes the administrative password.
clear counters
Zeros FTP counters.
clrscrn
Clears the screen.
default admin username
Resets the FTP username to the default (admin).
exit
Returns to the config level.
no admin password
Removes the FTP administrative password.
no clear counters
Unzeros FTP counters.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show statistics
Displays the FTP statistics.
state disable
Disables the FTP server.
state enable
Enables the FTP server.
write
Stores the current configuration in permanent memory.
host 1 (tunnel-connect-host:2:1) level commands
address <text>
Sets the remote host to establish tunneling connections with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16 bytes.