3: Summary of CLI Commands
EDS Device Servers Command Reference 27
Device
Configuration
Command
Description
show ixp
Shows various debug information about the IXP.
show ixp db
<port>
Shows information about the IXP Ethernet DB layer
show ixp
ethernet <port>
Shows information about the IXP Ethernet Access layer
show ixp mac
<port>
Shows information about the IXP Ethernet MAC
show ixp mh
<port>
Shows information about the IXP NPE Message Handler layer
show ixp mii
Shows information about the IXP MII layer
show ixp qmgr
<port>
Shows information about the IXP QMgr layer
show tlog
Shows the internal trouble log
show upload
Shows the current upload state
show memory
Prompt displays:
This command will affect the performance of
tunneling. Continue (yes/no)?
Reply yes: The system displays the following information in both
the main heap and internal buffer heap: Total memory, available
memory, number of fragments, and allocated blocks.
write
Stores and applies the current configuration into permanent
memory.
To Next Page
Loading...
