Lantronix EDS4100 Reference Manual

3: Summary of CLI Commands
EDS Device Servers Command Reference 40
Tunnel Menu Command Description
disconnect stop character
Enables disconnect mode to disconnect when a stop
character is received.
disconnect timeout
Enables disconnect mode to disconnect on a timeout.
disconnect timeout
<number>
Sets disconnect mode timeout in milliseconds.
<number> = disconnect mode timeout value, in
milliseconds.
echo start character
Enables forwarding (tunneling) of the start character.
echo stop character
Enables forwarding (tunneling) of stop-character.
exit
Exits the Tunnel menu and returns to the Enable menu.
kill accept connection
Kills the active accept mode connection.
kill connect connection
Kills the active connect mode connection.
line n
Displays the Line n menu level, where n = 1, 2, 3, 4, and
so forth (up to 32 for the EDS32PR).
modem connect string
<string>
Adds to the connect string in modem emulation.
<string> = connect string.
modem echo commands
Echoes modem commands.
modem echo pluses
Echoes the +++ characters when entering modem
Command mode.
modem error unknown
commands
Returns an error upon unknown AT commands.
modem numeric response
codes
Uses numeric response codes.
modem text response codes
Uses text response codes.
modem verbose
Uses verbose status codes.
no accept
Disables accept mode.
no accept aes decryption
key
Removes the AES decryption key.
no accept aes key encrypt
Removes the AES encryption key.
no accept block network
Forwards (tunnel) network data.
no accept block serial
Forwards (tunnel) serial data.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English