Operating Instructions – Mobility Wallbox Home / Home Pro 11
6 Preparing the installation
6.1 Choosing an installation site
► Choose an installation site that meets the following requirements:
– level, plumb wall
– sufficient space for the product (see Technical data on page 21)
– suitable environmental conditions (see Technical data on page 21)
– no direct sunlight
6.2 Commissioning the installation
WARNING!
Danger to life due to electric shock
There is a risk of electric shock when working on the electrical
installation of the product.
► Never install the product yourself.
► Ask a qualified electrician to install the product.
WARNING!
Risk of injury due to damaged product
A damaged or incomplete product can lead to malfunctions and
hazards.
► Only have the product assembled if all items in the scope of
delivery are complete and undamaged.
6.3 Replacing the covers
The covers and the housing are equipped with magnets that keep the
covers in place on the housing. You can replace the mounted covers at
any time.
Detaching the covers from the housing
Required tools:
flat dismantling wedge (not included in the
scope of delivery)
To Next Page
Loading...