32 | P a g e
2.42 Circle
While editing a template, there are 2 types of circles that can be drawn. 3-Point Circle and 1-Point Circle.
To draw a 1-Point Circle:
2.43 Ellipse
To draw an ellipse:
1. Click Draw.
2. Click Ellipse.
3. Enter the Horizontal Radius (how wide it is left to right) and Vertical Radius how tall it is (top to bottom).
4. Click anywhere on the template.
2.44 Cross
To draw a Manual Cross:
1. Click Draw.
2. Click Manual Cross.
3. Click anywhere on the template and a cross will be created.
2.45 Custom Box
Adding a custom box is use when you want to insert a standard sized box. Most often when there is an island that you
do not want to template but you have a standard sized shape that needs to be added to a drawing.
To Next Page