3)
Swipe the ON/OFF switch to ON. The message Now Discoverable will appear
4)
The Headset should be identified by your iPhone/iPad. Select it to complete the
pairing
C: PAIRING WITH PC/NOTEBOOK OR TABLET
Before installing this product, please make sure your PC or device supports Bluetooth,
that the Bluetooth feature is enabled or that the Bluetooth dongle has been installed
correctly
1)
Open the Bluetooth program of your PC or device and keep the AO-BT404 and PC
within 1 meter of each other whist pairing.
2)
Activate the headset pairing mode: hold the MFB (middle button) for 7 seconds –
the red and blue LED will blink alternately
3)
Activate Bluetooth connectivity on your PC and begin the SEARCH NEW DEVICE
function.
4)
After a short scanning period, your PC or Device will indicate that your AO-BT404
headset has been discovered and is ready for connection/pairing
5)
If you are prompted to enter a pin-code, use the code 0000 (four zero’s)
6)
The connection should then be complete and the headset will be ready for use
Note: If the above pairing process has failed, please ensure your Bluetooth receiver or
software has been installed correctly and then repeat the above steps.
Note: Once paired and recognized by your PC/notebook, you can use the headset for
chat functions such as Skype® or MSN®.
D: PAIRING WITH MAC OS X 10 OR ABOVE
1)
Activate the headset pairing mode: hold the MFB (middle button) for 7 seconds –
the red and blue LED will blink alternately
2)
From the Setup Bluetooth Device in the Bluetooth status menu / menu bar,
follow the onscreen instructions to help pair your headset.
To Next Page
Loading...
