CONTROLS FOR MUSIC
Once the AO-BT404 headset connects with a music device (such as an iPod touch,
iPhone or Smartphone) high quality stereo music can be transmitted to the headset
with volume and track playback functions controlled from the headset:
Note:
•
On some mobile phones, when playing music, the sound may be heard on the
speaker of the mobile phone. If this is the case, please choose “transmit the sound
through Bluetooth / AO-BT404” (or something similar). This is normally found within
the settings section on your device. When the volume of headset is adjusted to
maximum or minimum, you will hear an indication tone.
•
The Remote control functions will only work with devices which support Bluetooth
standard AVRCP (such as iPhone/iPad/some smartphones). Please refer to the
instruction manual of your mobile phone or Bluetooth transmitter for further
Information.
LED AND TONE INDICATIONS
Red LED is on The headset is charging
Pairing mode – the headset is now
Red LED blinks twice
(Every 20 seconds)
Low power
Blue LED quickly blinks twice
The headset is not connected to a device.
Blue and Red LED rapid blink
(Three times every 2 seconds)
Set up HFP and A2DP connection
Tone indicator Status of the headset
An alert tone sounds every 20 seconds