The mast bend should be approx 4” at the
main spreaders.
y pulling the main halyard tight and holding
e
give you a good guide.
e
p holding the halyard away.
ack.
all
screwdriver and rotating the grub
rew anticlockwise to secure bottle
he backstay control can be used to induce
ore mast bend if required to flatten the sail.
The lowers
B
the halyard to the aft face of the mast abov
the gooseneck will
The halyard will be 4 ½ – 5” at spreader
height – this is allowing for the sheave at th
to
The mast section depth is 4” and is a useful
guide comparison.
D1 shrouds can now be attached and should be just sl
Lock the shrouds by using a sm
sc
screw.
T
m
To Next Page
Loading...
Need help?
General
