JIB SHEET AND CUNNINGHAM SET UP
1. The jib sheets are a continuous
system.
ugh the spring and
shackle at the base of the jib
4.
2. Shackle the two blocks to the jib
clew.
3. Dead end one end of the jib
sheet thro
car pulley.
Feed the other end of the jib
sheet up
thru the block on th
jib tack and then back thru the
5.
the deck.
e
block on the track.
The sheet is then led back to
the ratchet block on
6. The sheet is then led across the boat and led thru the ratchet block,
7. Thru the jib car block
8. to the jib block and back to the jib car block where it is secured with a
dead end knot.
To Next Page
Loading...
Need help?
General
