Laser SB3 User Manual

JIB CUNNINGHAM
1. The jib Cunningham is
controlled from the cleat at
the side of the mast on the
l
stay and
eye at the tack of the jib.
back
2. The jib Cunningham is led from the
port side of the bow fitting to the
port side. This is a usefu
control if used in
conjunction with the jib
halyard to raise and lower
the jib on the fore
fine tune the sheeting
angle
3. Thru the tack eye and to the turning
block on the starboard side of the
bow fitting. This then goes
thru the tack eye and dead ends at
the Becket on the port side block.

Laser SB3 Specifications

General

Brand	Laser
Model	SB3
Category	Boat
Language	English