17
CoatingTest-Master
EN
Function / Application
The coating thickness measurement device is used for the non-destructive
measurement of coating thicknesses on metal components based on the mag-
netic induction principle or eddy current principle. Main applications: Quality
control in paint shops, in the automotive industry and for the inspection of
material coating qualities to ensure corrosion protection of metal components.
Integrated memory and statistics evaluation for measurement analysis.
Completely read through the operating instructions, the „Warranty and
Additional Information“ booklet as well as the latest information under
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and passed
on together with the device.
!
General safety instructions
– The device must only be used in accordance with its intended
OTQONRD@MCVHSGHMSGDRBNODNESGDRODBHÖB@SHNMR
– The measuring tools and accessories are not toys. Keep out of reach of children.
m3GDRSQTBSTQDNESGDCDUHBDLTRSMNSADLNCHÖDCHM@MXV@X
– Do not expose the device to mechanical stress, extreme temperatures,
LNHRSTQDNQRHFMHÖB@MSUHAQ@SHNM
– The device must no longer be used if one or more of its functions fail or the
battery charge is weak.
– Please ensure compliance with the safety regulations set out by local and
national authorities with regard to the correct and proper use of the device.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations
or in the vicinity of people with pacemakers – may apply. Electronic devices
can potentially cause hazards or interference or be subject to hazards or
interference.
To Next Page
Loading...
Need help?
General
