LaserLiner CoatingTest-Master - Page 23

23
CoatingTest-Master
7
EN
Menu item 4: Delete
Current
data
Current data
This option deletes the last measured value
in order to correct false measurements.
The statistics are updated.
All data
Delete all data
This option deletes all data and statistics in the
current working mode (direct mode or group
mode 1-4).
Group
data
Delete group data
In addition to the „Delete all data“ function, this
option deletes the set limits and the one-point
and two-point calibration values.
"NMÖQLSGDRTARDPTDMSOQNLOSDHSGDQVHSG
„Yes“ or „No“.
Memory location occupied in direct mode: additional measurements
are possible. The data recorded first is overwritten and the statistics
are updated accordingly.
Memory location occupied in group mode: additional measurements
are possible. The display shows the message „Full“. Measurement
data is not overwritten and the statistics are not updated.
!