8 • LMH Series Rotary Lasers
ALWAYS turn the LMH "OFF" when not in use. Leaving the LMH "ON"
increases the risk of someone inadvertently staring into the
laser beam.
DO NOT operate the LMH in combustible areas such as in the presence
of fl ammable liquids, gases or dust.
ALWAYS position the pipe laser tool securely. Damage to the LMH
and/or serious injury to the user could result if the LMH falls.
ALWAYS use only the accessories that are recommended by the
manufacturer of your LMH. Use of accessories that have been
designed for use with other rotary lasers could result in
serious injury.
DO NOT use this LMH for any purpose other than those
outlined in this manual. This could result in serious injury.
DO NOT leave LMH "ON" unattended in any operating mode.
ALWAYS repair and servicing must be performed by a qualifi ed repair
facility. Repairs performed by unqualifi ed personnel could result in
serious injury.
DO NOT disassemble the LMH. There are no user serviceable parts
inside. Disassembling the laser will void all warranties on the product.
Do not modify the product in any way. Modifying the LMH may result
in hazardous laser radiation exposure.
2.1 ELECTRICAL SAFETY PROCEDURES
WARNING: Batteries can explode or leak, and can cause injury or
fi re. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label and
package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same
time with new batteries of the same brand and type.
DO NOT mix battery chemistries.
DISPOSE of batteries per local code.
DO NOT dispose of batteries in fi re.
KEEP batteries out of reach of children.
REMOVE batteries if the device will not be used for several months.
To Next Page
Loading...
Need help?
General
