LaserPecker LP5 - Table of Contents

·
·
·
·
·
·
·
·
·
·
·
1
General Safety
Only use this machine in accordance with these instructions and all
applicable local and national laws and regulations.
Read and get familiar with all safety precautions and procedures before
using the machine. Strictly follow all safety precautions. Ensure that the
machine is properly assembled and is working properly.
DO NOT allow use by minors, by untrained personnel, or by any personnel
suering from any physical or mental limitation that might aect their
ability to use the machine safely and properly.
Ensure that the workspace is clean and flat.
Keep the area around the machine dry, well ventilated, and
environmentally controlled to 50–95°F (10–35°C) and 10–95% humidity.
DO NOT leave the machine unaended during operation.
In the event of the following situations, please stop using the machine and
cut o the power immediately:
A burning smell is detected coming from the machine.
Open flames or sparks are observed being generated from the engraving
material.
Any components of the machine appear to be damaged or
malfunctioning.
Unexpected cessation of machine operation for no clear reason.
Abnormal sounds, smoke, or unusual lighting are emied from the
machine.
Safety Information
Software Download
Package List
Quick Assembly
Meet the LP5
Before using the product
Connecting Software
Using the product
Maintenance
Technical Specifications
Statements
01
03
04
05
08
09
10
12
14
15
16
Contents
01
Safety Information