If laser power aenuation occurs, for example, engraved paerns are
shallow or uneven, the Field Lens may get dirty. Clean it with the lint-free
cloth moistened with alcohol.
Field Lens Maintenance
*The filter on the right side of the Laser unit is an air intake filter and cannot be removed.
Dust Filter Cleaning Laser Unit Leveling
If smoke runs out of the protective cover, the exhaust fan and smoke outlet
may be blocked due to dust. Unscrew the fan from the cover using a
screwdriver and clean them to ensure proper smoke exhausting.
Conical Protective Cover Exhaust Fan Cleaning
It is recommended to level the Laser Unit before use. If it is not level, the
Laser Unit can be adjusted to a level state by using the H2 hex key to adjust
the two leveling screws on the cantilever arm.
Maintenance
14
( Hex Key H2 )
To Next Page
Loading...