espresso coffee machines
LSI 022 - Rev. 00 - Ed. 12/2015
17
Carry out this procedure to program the remaining doses, using the 1-cup filter holder (13) or the 2-cup one (5), according
to the type of dose to be programmed.
To quit the programming function, press the free flow delivery button (e) for 5 seconds or, alternatively, wait 1 minute to
quit the function automatically.
Take note!
Take note!
By setting the doses on the first touchpad on the right, automatically the other groups will be acquiring the same doses;
if you want to set a group with different doses, repeat the same dose setting procedure on the touchpad corresponding to
the group you want to program differently.
Danger!
To Next Page
Loading...
