espresso coffee machines
LSI 022 - Rev. 00 - Ed. 12/2015
19
5.6 INDIVIDUAL TEMPERATURE CONTROL - I.T.C. - (OPTIONAL)
This system makes it possible to set a different coffee brewing temperature for
each delivery group.
The temperature of each group is independent from the temperature set in
the boiler.
To vary the temperature on a group, use the corresponding regulator alongside
the group itself, which can be reached through the opening in the top of the, upper
cup grid (1 - Fig. 10). Turn the adjustment screw anticlockwise to decrease the
temperature. Turn the adjustment screw clockwise to increase the temperature.
Every full turn of the adjustment screw corresponds to a change of approximately 2 °C. Changes must only be made to
adapt the temperature of the delivery group to the coffee blend being used, so as to improve the result in the cup.
Take note!
Temperature
regulator
Fig. 10
5.7 ELECTRIC CUP WARMER (OPTIONAL)
The appliances can also be equipped with an electric cup warmer (as optional) for an additional cup heating. To switch on
the cup warmer, press the button (17). Press the same button to switch it off.
To Next Page
Loading...
