Lauda RP 3530 - Managing Current Consumption; Setting Maximum Current Consumption (Master)

Proline Low-temperature Thermostats
58 Starting up YACE0072 / 21.08.07
Master
Bsp
3 x to LMDls
to
O@p@
− Call current consumption
Bsp.
− The present setting is displayed.
− The current consumption is shown flashing: e.g.
0&/ A.
or
− Set the required maximum current consumption (in A).
Wait 4 seconds or
− Display flashes 4 s Æ new value is automatically accepted, or
− Value is immediately accepted with the Enter key.
Command
Current Consumption
− Open the device parameter menu via the
soft key Menu .
− With the cursor keys change further to
Æ Settings Æ Basic settings Æ
Current Consumpt. .
− 16.0 A is presently active.
− Open the settings window with .
− Change the current with cursor or soft
keys and accept with or End ,
− or quit the window with without making
changes.
Bsp
°C
Hel
p
Menu End T
set
T
fix
16.0 A
Display
Sounds Master
Sounds Command
Language
Master Mode
Autostart
Current consumpt.
Hel
p
Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Max. current consumption (in A):
16.0
Min: 10.0 A Max: 16.0 A