Lauda UB 20 - Accessories

LAUDA Ultra-Thermostats
UB 20(-D), UB 25, UB 50, UB 30, UB 40
UB 20 F, UB 20 J, UB 30 J, UB 40 J, UB 65 J
UB 20 JL, UB 30 JL, UB 40 JL
YATE0013 /10.04.02
- 64 -
11 Accessories
LAUDA Thermostats (circular, of normal height)
Stainless steel plating racks
Test tube rack for 20 pieces up to 16 mm dia. Cat. No. UG 004
for U 6,U 6-D
Pyncometer rack for 4 pieces Cat. No. UG 005
for U 6, U 6-D
Test tube rack for 48 pieces up to 16 mm dia. Cat. No. UG 006
for U 12, U 12-D
Pyncometer rack for 12 pieces Cat. No. UG 007
for U 12, U 12-D
Test tube rack for 20 pieces up to 16 mm dia. Cat. No. UG 004
for US 6, US 6-D
Pyncometer rack for 4 pieces Cat. No. UG 005
for US 6, US 6-D
Test tube rack for 48 pieces up to 16 mm dia. Cat. No. UG 006
for US 12, US 12-D
Pyncometer rack for 12 pieces Cat. No. UG 007
for US 12, US 12-D
Test and centrifugal tubes etc.
UB 20(-D) up to 2 pieces, UB 25 up to 4 pieces, UB 50 up to 8 pieces
RH 13 for 56 tubes 10 - 13 dia., 80 mm immersion Cat. No. UG 086
RH 18/1 for 36 tubes 14 - 18 dia., 80 mm immersion Cat. No. UG 087
RH 18/2 for 36 tubes 14 - 18 dia., 110 mm immersion Cat. No. UG 088
RH 30 for 10 tubes 24 - 30 dia., 110 mm immersion Cat. No. UG 089
Rising platform with continuous height adjustment Cat. No. LTZ 012
for UB 20(-D); bench area 240 x 225 mm;
When the Rising platform is mounted the bath opening
will be reduced to 250 x 225 mm.
Cover plate UB 20(-D),
1 opening 195 mm dia. ,
1 set water bath rings, 1 rising platform Cat. No. LTZ 011
Cover plate UB 25/2
2 openings 195 mm dia., 2 sets water bath rings,
2 rising platforms, 1 stand rod Cat. No. LTZ 013