LAUMAS WLIGHT - Piece Counter Operations; Increasing and Decreasing Count; Displaying Counted Items

- 24 -
PIECE COUNTER
Weight has to be set to zero before selecting operation type.
INCREASING OPERATION
- Load the empty container on the scale;
- press TARE to display zero (net weight);
- press START, select  and confirm with ENTER,  appears on the display;
- insert sample pieces in the container and press ENTER;
- set the number of sample pieces just loaded and confirm with ENTER;
The instrument displays the average weight calculated for the single piece for 1 second (PMU in
1/1000 unit of measure) and then the number of pieces preceded by the letter  (e.g.:  ), the
system is now ready to start counting the pieces.
DECREASING OPERATION
- Load pieces to be counted on the scale;
- press TARE to display zero (net weight);
- remove sample pieces;
- press START, select  and confirm with ENTER,  appears on the display;
- set the number of sample pieces just removed and confirm with ENTER;
The instrument displays the average weight calculated for the single piece for 1 second (PMU in
1/1000 unit of measure) and then the negative number of pieces subtracted preceded by the letter 
(e.g.:  ), the system is now ready to start counting the pieces.
DISPLAY AND OPERATION
Pressing START you can move from one display to another:
- total weight on scale: preceded by the letter  (e.g.:  );
- average unit weight calculated: preceded by the letter  (e.g.: );
- number of pieces: preceded by the letter  (e.g.:  );
Press PRINT to print the number of pieces on the scale (see section PRINTING EXAMPLES).