23
LAUNCH Pilot TPMS User's Manual
EN
5.5 TPMS Learning
This function is used to write sensor IDs into the vehicle ECU for sensor
recognition. Learning is needed to be performed when the new sensor IDs
are different from the original sensor IDs stored within TPMS ECU. There are
THREE ways for Learning: Static Learning, Self-learning and OBD Learning.
Static learning
Static Learning requires the vehicle be placed in the “Learn Mode”. Tap Learning
to access the learning menu.
Fig. 5-19
Follow the following Learning process to perform Static Learning.
Fig. 5-20
To Next Page
Loading...
