LAUNCH X-431 PRO3 V4.0 User Manual
79
4. There are two Wi-Fi communication modes available for the VCI module.
y
Work as Wi-Fi hotspot: Once enabled, the VCI module and the tablet
automatically connect and form a LAN network to make communication. In
this case, the tablet cannot surf the Internet.
y
Work as network adaptor: Once enabled, a Wi-Fi connection dialog box
appears:
Input the Wi-Fi network name and access password (if the network is
encrypted) until it is properly connected. In this case, the tablet can surf the
Internet and communicate with the VCI module.
* Note: please be sure to keep the VCI powered on while performing the operation.
9.4 Immobilizer Programmer
X-PROG Immobilizer programmer is available to read and write vehicle key chip
To Next Page
Loading...
