Launch Creader 529 User Manual

26
LAUNCH
529 OBD II Scanner User’s Manual
1. Read Codes
This function allows you to view the Diagnostic Trouble Codes (DTCs)
retrieved from the vehicle’s on-board computer.
Note: Never replace a part based only on the DTC definition. Each DTC has
a set of testing procedures, instructions and flow charts that must be followed
to conrm the locaon of the problem. This informaon is found in the vehicle’s
service manual. Always refer to the vehicle’s service manual for detailed tesng
instrucons.
Select [Read Codes] from the Diagnostic Menu and press [OK]. A screen
similar to the following gure will appear.
Figure 5-3
Press [OK] to enter to select the manufacturer. Figure 5-4 will be shown on
the screen. Press [
] / [ ] to select different items; press the [ ] / [ ] button
to turn to next or previous page. After selecting the desired one, press [OK] to
conrm.

Launch Creader 529 Specifications

General

Brand	Launch
Model	Creader 529
Category	Scanner
Language	English