Launch Creader 529 User Manual

40
LAUNCH
529 OBD II Scanner User’s Manual
5.6 Help
This function allows you to have a general knowledge of OBD, Data stream
and I/M Readiness.
• About OBD: Relevant introduction information about OBD.
• About Data stream: Relevant introduction information about Data stream.
• Print Help: Provides a operation tips on Printing the diagnostic record or
DTCs.
• I/M Readniess: Introduces the full name of each monitor and indicates
status of each icon (
, and ).
5.7 Setup
Select [SETUP] in the Job menu and press [OK], the screen similar to the
following gure will appear:
Figure 5-23
This option allows you to make the following settings:
5.7.1 Language
This option enables you to set the user interface language.
Due to continuous software upgrade, language interface may vary with
different software versions.
Choose [Language] and press [OK], the screen will display all available
languages. Press [
] / [ ] to select the desired language and press [OK] to
conrm. The system will convert to the chosen language interface at once.

Launch Creader 529 Specifications

General

Brand	Launch
Model	Creader 529
Category	Scanner
Language	English