To Next PageTo Next Page
Need help?Do you have a question about the Launch X-431 PAD III and is the answer not in the manual?
General| Resolution | 1280 x 800 |
|---|---|
| RAM | 2 GB |
| Connectivity | Wi-Fi, Bluetooth |
| Processor | Quad-core |
| Operating System | Android |
| Display | 10.1-inch IPS |
| Battery | 7000 mAh |
| Camera | Rear: 5MP, Front: 2MP |
| Ports | USB, HDMI |
| Supported Protocols | CAN |
Safety guidelines for operating the X-431 PAD III device.
Safety guidelines for operating vehicle ECUs.
Instructions for charging the X-431 PAD III tablet.
Procedures for powering the tablet on and off.
Information on setting up network connections for the tablet.
How to establish a wired network connection.
Steps to connect to a Wi-Fi network.
Flowchart illustrating the diagnostic process for new users.
Process for registering and downloading diagnostic software.
Steps for registering a user account for the software.
Communication methods (Bluetooth/USB) for passenger vehicles.
Communication methods (Bluetooth/Wi-Fi/USB) for commercial vehicles.
Information on connecting the device to vehicles.
Preparation steps before making connections.
Diagram showing DLC location on a vehicle.
Connecting to non-OBDII vehicles and power options.
Connecting to commercial vehicles' DLC.
Setting up communication for passenger vehicles.
Setting up communication for commercial vehicles.
Detailed process for Bluetooth pairing with VCI module.
How to establish a USB cable connection.
Steps to establish Wi-Fi communication.
Process and notes for intelligent diagnosis with AutoDetect.
Vehicle selection and diagnostic approaches.
Display of health report and quick test results.
Display of system scan results.
Details of diagnostic menus like Version Information, Read DTC.
Initiating remote diagnosis sessions.
Options for device-to-device remote diagnosis.
Connecting to PC for remote diagnosis.
When to perform the oil reset service.
When to perform the electronic parking brake reset.
When to perform steering angle calibration.
When to perform ABS bleeding.
When to perform TPMS reset.
Explanation of the gear learning function.
Explanation of IMMO service and key matching.
Procedure for injector coding.
Procedure for battery maintenance system reset.
When to perform DPF regeneration.
Procedure for electronic throttle position reset.
Steps for updating diagnostic software and APK.
Details on Sensorbox and Multimeter features.
Structure and indicators of the Sensorbox.
Detailed diagram of the Sensorbox structure.
List of Sensorbox accessories with images.
How to simulate vehicle sensors.
Steps for connecting the Sensorbox for simulation.
Performing DC voltage, fixed frequency simulations.
Details of DC voltage simulation settings.
