Launch X-431 PAD III - Printer Set

LAUNCH X-431 PAD III User Manual
135
Once you saved the print information, it will be entered automatically in the “Add
Information” box every time you save the diagnostic report.
14.8.3 Printer Set
This option is designed to establish a wireless connection between X-431 PAD
III and the Wi-Fi printer (sold separately) while performing printing operations.
Follow the steps below to connect the printer.
1. Tap “Printer Set”.
Fig. 15-2
A. If it is the first time you have operated this printer, please proceed the
following:
2. For initial use, you are suggested to reset the printer: Press and hold [MODE]
& [FEED] for 8 seconds, the following resetting command will be printed out:
at + default = 1
ok
at + reboot = 1
rebooting...
3. Tap “Reset” to configure Wi-Fi printer.