Launch X-431 PAD III - System Selection

LAUNCH X-431 PAD III User Manual
44
Fig. 5-22
Tap the desired system to advance to the test function selection page. For
detailed operations on test function, please refer to Chapter 5.2.3.
5.2.3 System Selection
This option allows you manually select the test system and function step by step.
In Fig. 5-17, tap “System Selection”, the screen displays as follows:
Fig. 5-23
Swipe the screen from the bottom to view the vehicle system on the next page.
Tap the desired system (take “ECM” for example) to jump to the test function
page.