LAUNCH X-431 PAD III User Manual
87
11.3 Batterybox Structure & Accessories
11.3.1 Batterybox structure
Fig.11-1 Batterybox
Below describes the ports and indicators for the Batterybox.
No.
Name Descriptions
1
Power LED
It keeps solid red after the Scopebox is powered
on.
2
B-shaped USB
port
Connect to the diagnostic tool via USB cable so
that the signal can be displayed on the tool.
3
Battery connector
Connect the Kelvin clip to battery for battery
test.
4
Status LED
11.3.2 Test accessories
Fig. 11-2 Kelvin clip
To Next Page
Loading...
