Launch X-431 PAD III - Diagnosis Methods (Only for Commercial Vehicle; Gasoline & Diesel Version)

LAUNCH X-431 PAD III User Manual
23
*Notes:

While using the diagnosis via Bluetooth, the VCI connector should be paired with
the tablet. If no Bluetooth setting is done before diagnostic software is launched,
you can also configure it while using the software.

To obtain stable communication, you are strongly recommended to perform the
vehicle diagnosis via USB cable. In this case, the USB cable is required to connect
the VCI connector and the tablet.
4.3 Diagnosis Methods (Only for Commercial Vehicle/ Gasoline &
Diesel Version)
X-431 PAD III tablet supports 3 communication methods with the VCI connector:
wireless Bluetooth and USB cable. Choose any one of the methods to diagnose
a vehicle.
Fig. 4-10
*Notes:

While using the diagnosis via Bluetooth, the VCI module should be paired with the
X-431 PAD III tablet. If no Bluetooth setting is done before diagnostic software is