Launch X-431 PAD III - Oscilloscope (Toolbox)

LAUNCH X-431 PAD III User Manual
85
11 Batterybox (Toolbox)
11.1 Product Summary
X-431 PAD III provides an optional function of automotive battery test, which
adopts the latest state-of-the-art conductance testing technology in the world
and can test vehicle’s battery status. Two testing environments (Inside the
Vehicle and Outside the Vehicle) are available and applicable to battery test. In
addition to battery test, charging system and actuation system test can be done
while Inside the Vehicle is selected.
It supports various battery standards and specifications, including CCA, DIN,
IEC, EN, JIS, SAE and GB etc. It is specifically designed to help car owner,
repair workshop, battery factory use battery test instrument properly and
determine whether the battery is normal or not.
Battery test aims to check starting plumbic acid storage batteries for vehicles,
ship, boats and aviations, etc. It can test all kinds of batteries complying with
CCA, DIN, JIS, EN, GB and SA standards. For detailed test standards, please
refer to Table 11-1.
Table 11-1 Test standard
Standards Standard (Full name) Test capacity range
CCA Battery Council International
100
～
1700
DIN Deutsche Industry Normen
100
～
1200
JIS Japanese Industry Standard
26A17
～
245H52
EN Europe Norm
100
～
1700
IEC National Electrical Commission
100
～
1200
GB Chinese National Standard
100
～
1200
SAE Society of Automotive
Engineers
100
～
1700