Launch KES-200 - Configuration List; Main Parts Instruction

LAUNCH KES-200 4Channel Oscilloscope
B-3
Frequency Width 500kHz
Measuring Voltage DC±150V
Magnification Times for
Waveform
Max. 5 times
Dynamic Waveform Memory 50 pages on-line memory; 8
pages off-line memory
Multimeter
Item Specification
Voltage DC –120~+120V
Current -0.4~0.4A
Resistance 0.0~40.0MΩ
Frequency 1Hz~100kHz
Duty cycle 0~100%
Battery voltage 9~15V
Tachometer 300~8000rpm
Intake manifold vacuum 0~105KPa
Ignition Waveform
Item Specification
Waveform Primary/Secondary Waveform
Ignition Mode Distributor and Distributorless
Triggering Mode Primary/Secondary Triggering
Starting System Analysis
Item Specification
Starting voltage 8.6~15.0V
Starting current 0~900A
Charging System Analysis
Item Specification
Charging voltage 8.6~15.0V
Charging current 0~40A
System Setting
Item Specification
Language English
Buzzer On/Off
Hardware Test Memory, Keypad, LCD, etc.
Software Update Internet Update with PC
Configuration List
Configuration List
No. Name Qty Remarks
1 Main Unit 1 KES-200
2 EA Secondary Signal
Connecting Cable
1
3 Electronic Converting Cable 1 4
4 Electronic Converting Cable 2 4
5 Electronic Converting Cable 3 10
6 Electronic Converting Cable 4 4
7 AC/DC switch power
100-240V/3.0A
1
8 EA multi-functional Slice
Sensor
1
9 Engine Analysis Cartridge 1 For ignition
waveform,
multimeter,
oscilloscope, test
10 Cylinder 1 Signal Cable 1
11 Secondary Ignition Signal
Cable
1
12 Battery Cable 1 Connected to the
battery
13 PC Cable 1 Connected to PC
14 Printer Cable 1 Connected to
printer
15 Update Cable 1 For Software
Update
16 Oscilloscope Cable 2 W/Clips
17 Oscilloscope Cable 2 W/Probe
18 Ground Cable 1
19 Main Cable 1
20 Charging current adapter 1 For charging
current test
21 Starting current adapter 1 For starting
current test
22 Charging current riffle adapter 1
23 Cylinder disabling cable 1
24 CD for PC Link 1
25 DIS adapter 1
26 Inductive adapter 1
27 User’s Manual of KES-200
28 After-sales Service
Handbook
1
29 Quality Certificate 1
30 Intake manifold vacuum
sensor
1 Optional
31 Intake manifold vacuum
adapter
1 Optional
Main Parts Instruction
Main cable: Fig.1-03. It’s necessary to applying the