Launch KES-200 - Page 57

LAUNCH KES-200 PC Link
H-2
[Power] and [Exit]), the screen will display the main
menu as shown in Fig.7-42.
Fig.7-42
Select [6.Cylinder Analysis], the screen will display the
first-level function menu as shown in Fig.7-43.
Fig.7-43
Press [4] key to select [4. Relative Compression] on
the first-level function menu, the screen will display the
second-level function menu as shown in Fig.7-44.
Fig.7-44
There are two functions for selection on the menu:
1.TEST, 2.VIEW.
For exiting the test, press [Exit] key. User can also
press [HELP] key to view the help information as
shown in Fig.7-45.
Fig.7-45
User can select one item to read by pressing [▲] or
[▼], and [ENTER] key.
Enter the Relative Compression Test
Press [1] key on the second-level function menu, the
screen will display for selecting the number of cylinder,
as shown in Fig.7-46.
Fig.7-46
Select number of cylinders by pressing [►] or [◄]
key or directly inputting the number. If the engine has
more than 5 cylinders (e.g. 6 cylinders), the screen will
be displayed as shown in Fig.7-47 after the number is
inputted and [ENTER] key is pressed.