9.2 Enter rim width b
Open the calipers wide enough to reach around the tire. Close the calipers so both tips contact
the rim flanges. Read the rim width on the calipers. As shown in the following figure. Enter rim
width b by using the rim width keys (each pressing value will be added or deducted as following
table indicated.)
Table : Value variation for rim width b.
9.3 Enter rim diameter d.
The rim diameter is indicated on tire side wall, as shown in the following figure. Enter rim diameter
d accordingly by using the rim diameter enter keys (each pressing value will be changed by 0.5
inch.)
Rim data entry with extension rod(6cm) As shown in the following figures, the extension rod
(6cm) is adapted on the rim distance pointer, for application of special profile rims.
Interval Value variation on display window
Actual rim width variation (inches)
0.2 1/4
0.5 1/2
0.7 3/4
11
To Next Page
Loading...
Need help?
General
