Need help?Do you have a question about the Launch X-631 and is the answer not in the manual?
General| Max. wheel weight | 65 kg |
|---|---|
| Balancing speed | 200 rpm |
| Balancing accuracy | ±1 g |
| Noise level | <70 dB |
| Rim width | 1.5 - 20 inches |
| Rim diameter | 10 - 24 inches |
Checks cabinet doors for distortion and smooth operation, and inspects surfaces for scratches.
Examines internal wiring for abnormalities, loose connections, or damaged cable covers.
Inspects the power supply cable for damage and the plug for distortion.
Checks the front-side switch for flexibility and the power supply indicator on the back side.
Tests wireless communication between probe rods and the main unit from a distance.
Guides on installing the calibration frame and adjusting lateral and vertical axle levels using a gradienter.
Instructs on checking lateral axle linearity by comparing CCD values from probe rods to calibrated values.
Details connecting sensors, cables, and PC, ensuring connectors are tight, and air bubbles are centered.
Explains the final step of saving calibration data, resulting in a 'check.ini' file.
Indicates successful completion of the probe rod calibration process.
To Next Page
