Launch X-631 - Antenna and RF Cable Inspection

Launch X-631 Wheel Aligner Maintenance Manual Testing for Cabinet Assembly
2-11
Item12: Antenna and RF Cable Inspection
Note: Check if RF cable and cupula antenna are damaged, and check if the connectors and antenna plastic bush are
fastened firmly.
Item13: Printer Inspection
1. Check and clear away the oil dirt and dust inside the printer;
2. Check if the nozzle is blocked by self-testing of the printer.
1. Check if power cable and USB connecting cable
are damaged;
2. Check if the power supply box is distorted, and the
contacts are in good condition.
Color cartridge
Black-white cartridge
Printer power supply
USB connecting cable
Printer power supply
connecting cable