Need help?Do you have a question about the Launch X-631 Plus and is the answer not in the manual?
General| Category | Industrial Electrical |
|---|---|
| Device Type | Programmable Logic Controller (PLC) |
| Input Voltage | 24V DC |
| Digital Inputs | 16 |
| Protection Class | IP20 |
| Dimensions (W x H x D) | 120 x 90 x 70 mm |
| Model | X-631 Plus |
| Analog Inputs | 4 |
| Analog Outputs | 2 |
| Communication Ports | RS-485, Ethernet |
| Operating Temperature | -20°C to 60°C |
| Humidity | 5% to 95% non-condensing |
Essential safety guidelines for operating the wheel aligner.
Safety measures for normal operations, service, and electrical work.
Specific safety instructions and applied symbols with hazard warnings.
Procedure for performing a standard wheel alignment measurement.
Viewing probe rod sensor status and communication.
Testing probe rod accuracy for toe-in and camber measurements.
Guidelines for maintaining the computer unit.
Instructions for cleaning and maintaining wheel clamps and probe rods.
To Next Page
