Launch X-631 - Item23: Wheel Clamp Inspection

To Next Page

To Previous Page

Launch X-631 Wheel Aligner Maintenance Manual Maintenance and Testing for Some Components

4-2

Item23: Wheel Clamp Inspection

Note: 1. Check the wheel clamp for distortion (especially for clamping claw);

2. Check if the rotary handle can rotate normally or not, and check if the clamping claw can flex

freely.

3. Check if locking handle can lock the main axle of probe rod or not.

Rotary handle

Clamping claw

Wheel clamp hole base

Check each screw

for looseness

Check each screw

for looseness

Locking handle

Other manuals for Launch X-631