LAUNCH X-431 PRO GT User Manual
21
Fig. 5-2
Check all the possible reasons of Bluetooth connection failure carefully, and then tap
“Confirm”.
Fig. 5-3
If the VCI connector was once used with other devices, you need to cancel the pairing
of the connector first in either of the following ways:
•
Tap “Tablet Settings” -> “Bluetooth” -> Choose the desired VCI connector from the
Paired list. Tap “ “, and then tap “FORGET” to unpair it.
•
Tap “Settings” -> “VCI Management” -> Tap “Deactivate matching”.
Tap “Scan” to start searching for the VCI connector and pairing up with it
.
To Next Page
Loading...
