LAUNCH X-431 PRO GT User Manual
46
Fig. 5-39
1. Slide the switch “Allow device to be connected to the WEB client remote
diagnostic device” to ON so that the partner can find and connect to this
device while using the PC.
2. Notify the partner of the PC client website http://remote.x431.com/cn/. When
the partner accesses the link, the PC displays as below:
*Note: Before processing remote diagnosis, please make sure the tablet is properly
connected to the vehicle.
Fig. 5-40
3. Tell the partner to input his own official technician account and password, and
then tap “Login” to navigate to the following figure.
To Next Page
Loading...
