Launch X-431 PRO V3.0 User Manual

LAUNCH X-431 PRO Series User Manual
40
Fig. 5-36
1. Slide the switch “Allow device to be connected to the WEB client remote
diagnostic device” to ON so that the partner can find and connect to this
device while using the PC.
2. Notify the partner of the PC client website http://remote.x431.com. When the
partner accesses the link, the PC displays as below:
*Note: Before processing remote diagnosis, please make sure the tool is properly
connected to the vehicle.

Launch X-431 PRO V3.0 Specifications

General

Display Resolution	1280 x 800
Wi-Fi	802.11 b/g/n
Bluetooth	Bluetooth 4.0
Supported Protocols	CAN
Operating System	Android