Launch X-431 PRO V3.0 User Manual

LAUNCH X-431 PRO Series User Manual
66
11 FAQ
1. How to save power?
 Please turn off the screen while the tool keeps idle.
 Set a shorter standby time.
 Decrease the brightness of the screen.
 If WLAN connection is not required, please turn it off.
 Disable GPS function if GPS service is not in use.
2. Communication error with vehicle ECU?
Please confirm:
1. Whether diagnostic connector is correctly connected.
2. Whether ignition switch is ON.
3. If all checks are normal, send vehicle year, make, model and VIN number to
us using Feedback feature.
3. Failed to enter into vehicle ECU system?
Please confirm:
1. Whether the vehicle is equipped with this system.
2. Whether the VCI dongle is correctly connected.
3. Whether ignition switch is ON.
4. If all checks are normal, send vehicle year, make, model and VIN number to
us using Feedback feature.
4. How to reset the tablet?
Resetting may cause data loss. Before doing so, please make sure important data
and information has been backed up.
Do the following to reset the tablet:
1. Tap “Settings” -> “Back & Reset”.
2. Tap “Factory data reset”.
3. Tap “Reset tablet”.

Launch X-431 PRO V3.0 Specifications

General

Display Resolution	1280 x 800
Wi-Fi	802.11 b/g/n
Bluetooth	Bluetooth 4.0
Supported Protocols	CAN
Operating System	Android