LAUNCH
14
• Tap View record to view the details of the current diagnostic report.
• To perform other functions, tap Quick access to directly go to the diagnostic function selection
screen. Choose the desired one to start a new diagnostic session.
B. If the handset failed to access the VIN information, the following screen will appear:
• Tap the input field to directly, tap OK. If the VIN exists on the remote server, the system will enter the
diagnostic function selection screen.
• Tap to launch the VIN recognition module.
Place the VIN inside the viewfinder rectangle to scan it. The most recognizable location for this
number is in the top left corner on the vehicle’s dashboard. Other locations include the driver’s
door or post, and the firewall under the hood.
• Tap to switch the display mode of the screen.
• Tap to turn the camera flash on.
• Tap to choose it from the record list if the VIN of the vehicle has been scanned before.
To Next Page
Loading...
Need help?
General
