LAUNCH
43
10.9 Profile
Use this item to view and configure personal information.
10.10 Change password
This item allows you to modify your login password.
10.11 Settings
It enables you to make some application settings and view software version information etc.
10.11.1 Units
It is designed to configure the measurement unit. Metric System and English System are available.
10.11.2 Shop Information
This option lets you define your shop information. It mainly includes Workshop, Address, Telephone,
and Fax etc.
When you saved the shop information, it will be entered automatically in the Add Information box every
time you save the diagnostic report.
10.11.3 Printer Set
This option is designed to establish a wireless connection between the tablet and the Wi-Fi printer (sold
separately) while performing printing operations.
The App is compatible with the LAUNCH Wi-Fi Printer (sold separately) and System (external printer).
For LAUNCH Wi-Fi printer, follow the User Manual included with the printer to configure it.
For other Wi-Fi printers,
Before printing, make sure the following conditions are met:
• The Wi-Fi printer is powered on and working normally.
• The print service plug-in associated with the printer is already installed on the tablet (Go to Google
Play or use the Browser to download and install it).
Follow the steps below to proceed:
1. Set the default printer as System.
2. Go to Other Modules -> Tablet Settings -> WLAN, set the WLAN switch to Off.
3. On the report details page, tap .
4. Touch next to Select a printer on the upper left corner of the screen.