Launch X-PROG 3 User Manual

4
LAUNCH
X-PROG 3 User Manual
2.3 Power Source
The product does not have an independent power supply, you can power it up
via either of the followings ways:
• Use the included power adaptor
• Connect the device through the vehicle’s DLC
2.4 Accessories
Photo Accessory Name Descrption
Main Diagnostic
Cable
To connect vehicle DLC port,
VCI and programmer for
diagnose.
Power adaptor
To provide power supply for
the programmer.
The fourth-
generation data
acquisition cable
After removing the vehicle
dashboard, connect
programmer, vehicle
dashboard, and the cable.
The fourth
generation of
EEPROM data
acquisition
cable (without
dismantling
dashboard)
Connect the programmer and
vehicle dashboard,and then
place the probe(the yellow
lead) to the designated area.

Launch X-PROG 3 Specifications

General

Brand	Launch
Model	X-PROG 3
Category	Car Alarm
Language	English

Summary

FCC Statement and Safety

FCC Statement

Details FCC compliance rules and conditions for operation of the device.

Safety Grades

Defines hazard levels: Danger, Warning, and Caution for user safety.

Safety Precautions

Lists essential safety rules to follow during operation and handling of the equipment.

Product Information

Packing List

Lists all included accessories and components that come with the main unit.

About this Manual

Target Reader

Identifies the intended audience for the user manual.

Typographic Conventions

Explains formatting elements used in the document for clarity and understanding.

Symbols Used

Defines the meaning of icons and symbols used throughout the manual.

About X-PROG 3

Product Overview

Provides a visual and descriptive introduction to the X-PROG 3 device.

Technical Specifications

Lists the key technical parameters and performance characteristics of the device.

Power Source

Details the methods available to power the X-PROG 3 device.

Accessories

Lists and describes all the accessories included with the X-PROG 3.

Diagnostics

Common Operations

Covers fundamental procedures for using the diagnostic functions.

Establish Hardware Connection

Guides on how to physically connect the device for diagnostic tasks.

Establish Wireless Connection

Explains the steps for setting up a wireless connection to the device.

Key Programming

Details the process of programming vehicle keys using the device.

Gearbox Programming

Provides instructions for programming vehicle gearboxes.

Engine Programming

Outlines the procedures for engine programming and data management.

Restore EEPROM Data

Software Upgrade

Warranty and Support

Warranty Information

Details the product warranty terms, coverage, and exclusions.

Customer Service

Provides contact information for technical support and inquiries.