LAVAZZA CLASSY PRO - Page 30

30
EN
The machine will start the milk system cleaning
cycle.
During milk system cleaning, the display will show
the following animation.
At the end of the cleaning cycle, connect the milk
tube to the drop drawer through the hole located
on the drop collecting grid .
The display will show the following animation.
Press the MULTIFUNCTION button to
confirm
The machine will start the rinsing cycle.
At the end of supply, rinsing is completed .
System filling
The “System filling” function allows to start filling
of the hydraulic circuit if the circuit is not properly
filled.
During circuit filling, the display will show the fol-
lowing animation.
MACHINE MENU
SYSTEM FILLING
CONNECT TUBE TO TRAY