To Next PageTo Next Page
Need help?Do you have a question about the LawnMaster DM15 and is the answer not in the manual?
General| Brand | LawnMaster |
|---|---|
| Model | DM15 |
| Category | Lawn Mower |
| Language | English |
Read instructions carefully, be familiar with controls and proper use of machine.
Ensure lawn area is defined, periodically inspect area for foreign objects, check blades.
Do not leave unattended, operate with guards, keep hands/feet away from rotating parts.
Avoid bad weather, do not modify mower, press STOP in accident, do not sit on mower.
Recharge only with specified charger, do not place near heat sources, avoid explosion risk.
Do not crush battery, avoid open flame, charge in dry locations, handle leakage.
Keep nuts/bolts tight, replace worn parts, use correct blades, handle battery leakage.
Press STOP, remove key, use both hands, carry with blade disc away from body.
Recharge only with specified charger, avoid fire/explosion risk from heat/sunlight.
Do not crush battery, avoid open flame, charge in dry locations, handle leakage.
Remove battery before storing, keep battery dry, clean contacts, unplug charger.
Ensure charging indoors, do not use non-rechargeable batteries, use correct charger.
Protect charger from moisture, operate with correct batteries, keep cord away from hazards.
Recycle correctly, do not dispose with municipal waste, dispose batteries responsibly.
Mower supplied fully assembled, remove contents, charge battery fully before first use.
Ensure uniform lawn surface, fill holes, remove stones, trim grass to 60mm.
Clearly define edges with edging/barriers, use visual/physical boundaries, use sensors.
Use paving, raised barriers, hedging, fine gravel, physical bump barriers for definition.
Protect obstacles like roots/wires, avoid holes/ditches, exclude steep slopes (>35%), protect pools/ponds.
Steps to install and remove the battery pack, ensuring isolator key is fitted correctly.
Explanation of buttons (START/ON, Auto Mow, Spot Cutting) and indicators (Battery, Error, Ultrasonic).
Procedure for powering on and off the mower using the START/ON button and isolator key.
Steps to start mowing, stop during operation, and turn off the mower safely.
Details on Auto Cutting (random pattern) and Spot Cutting (spiral pattern) modes.
How to adjust cutting height from 20mm to 60mm using the adjustment knob.
Instructions for battery charging, including warnings and LED indicator status.
Explanation of battery charge level indicators (LEDs) and their meanings.
Steps for operating the battery charger, including indicator lights and their status.
Information on charger temperature limits and troubleshooting flashing red light.
Keep safety devices clean, check bolts, remove grass/leaves, use dry cloths.
Safety precautions and steps for replacing worn or damaged mower blades.
Detailed steps to safely replace the mower blades using tools and protective gear.
How to clean the underside of the mower using a brush or damp cloth, avoid water.
Recommendations for storing the mower indoors in a clean, dry place.
Store battery away from metal objects, in a cool dry place, at optimal charge.
Procedure for updating mower software using a USB flash drive.
Causes and solutions for the robotic lawnmower getting stuck or caught.
Possible causes and solutions for the robotic lawnmower not starting.
Reasons for mower leaving the working area and how to rectify.
How to turn the mower upright and address the cause of it overturning.
Troubleshooting general control or function issues, including software updates.
Causes for the blade disc not rotating and normal operation explanations.
Reasons for mower vibration and how to balance the cutting system.
Causes and solutions for uneven grass cutting, dull blades or incorrect height.
Solutions for limited mowing area or battery duration, e.g., adjusting borders or battery.
Troubleshooting why the cutting blade is not rotating when the mower is switched on.
Diagnosing and resolving issues indicated by a continuous yellow error light.
Causes and solutions for mower tilted, rear wheels lifted, fallen over, or no grass detected.
Troubleshooting sensor errors, motor faults, or operation system errors indicated by red light.
Resolving communication issues between the mower and its camera.
Diagnosing abnormal battery temperature or electric core faults indicated by red flashing light.
Solutions for charging issues: contaminated contacts, defective charger, or battery fault.
Troubleshooting why charging LEDs do not illuminate after plugging in the charger.
Resolving issues with failed software updates, checking USB stick and file naming.
Specifications for mower length, width, height, and weight.
Technical data related to mowing performance: voltage, speed, cutting width, capacity.
Specifications for the battery charger: model, input, output, weight.
Specifications for the battery: model, voltage, capacity, type, weight.
Measured noise emission levels (Sound Power, Sound Pressure) for the mower.
