LawnMaster NPTGSP2517A Service Manual

43
NOPULL
TM
STARTER SYSTEM
male and female terminals in the corrugated pipe buckle;
3). The stop switch has broken.
B. Test the stop switch wiring harness of the engine (Fig. 87). If conduction fails, the possible causes
are:
1). An open circuit in the connection position between the wiring harness of the engine and the
ignition coil;
2). An open circuit in in the connection position between the wiring harness of the engine part and
the engine cover;
3). There is loose or failed contact in the connection between the wiring harness of the engine and
the bullet terminals.
Fig. 87
Fig. 86

LawnMaster NPTGSP2517A Specifications

General

Brand	LawnMaster
Model	NPTGSP2517A
Category	Trimmer
Language	English