LCF Technics Product User Guide
Imperial/Metric units selection(km/h mile/h)
Use the
i
button to enter the Imperial/Metric units selection, press + button to switch
between kph and mph. The default is Kph.
Walk assist (6Kph) function selection
Use the
i
button to enter the walk assist (6Kph) function selection, press + button to switch
between ON/OFF. Default is OFF.
When enabled: press and hold the
-
button for 3 seconds to start the 6 Kph motor rotation –
walk assist.
LCF Technics Limited | The Old Library, Remount Farm, Lusk, Co Dublin, Ireland, K45 XP26 | https://lcftechnics.eu/
Phone: +353 (0) 85 261 6555 | Email: service@lcftechnics.eu | Copyright © 2021 LCF Technics
Page 13
To Next Page
Loading...